← Back to Lab
LAB 07

Configure VLAN Segmentation

INTERMEDIATE 20 MIN 1 SWITCH • 2 PCs
LAB INSTRUCTIONS
  1. 1Create VLAN 10
  2. 2Name it STUDENTS
  3. 3Assign Gi0/1 as an access port
  4. 4Add Gi0/1 to VLAN 10
  5. 5Verify with show vlan brief
NETWORK TOPOLOGY
SW-01 PC-01 PC-02 Gi0/1 VLAN: unassigned
TERMINAL
SW-01# show vlan brief VLAN Name Status Ports ---- --------- ------- ------------------ 1 default active Gi0/1, Gi0/2, Gi0/3, Gi0/4 # type "enable" is not required — you're already in privileged mode. # try: configure terminal
SW-01#